Tubular and continuous lengths of AA CABLE SHIELD® are made from 36AWG Co-NETIC® AA high permeability wire. Four stock diameters are available.
AA CABLE SHIELD® provides a flexible, continuously enclosed shielding barrier with distinct advantages over foil wrapping or rigid channeling, and is used to avoid pickup of unwanted external H-fields (D.C. to 100 kHz), or to mitigate radiation from cable and conductors. Braid is tightly weaved, so shield coverage is 85% - 90% at nominal linear state.
Our AA CABLE SHIELD® has been Perfection Annealed to our exacting standards. No further annealing is required.
Complies with A-A-59569 (QQ-B-575). Wire meets military specification MIL-N-14411, Comp 1.
|Item Number||Nominal Internal Diameter||Expands To||Weight per Foot||Length|
|WBS-250||1/4 in / 6.35 mm||5/16 in / 7.90 mm||0.031 lbs||Cut to Length as Needed|
|WBS-375||3/8 in / 9.53 mm||7/16 in / 11.10 mm||0.038 lbs||Cut to Length as Needed|
|WBS-500||1/2 in / 12.70 mm||5/8 in / 15.80 mm||0.046 lbs||Cut to Length as Needed|
|WBS-750||3/4 in / 19.05 mm||7/8 in / 22.20 mm||0.078 lbs||Cut to Length as Needed|