Magnetic Shields Corp. recommends a hands-on approach to experimenting, sampling, and evaluation using our Lab Kits. Our Internet Special Lab Kit combines the Basic Lab Kit plus a Magnetic Field Meter - Save 10%. Evaluation Lab Kits are purchased by OEM Design and Electrical Engineers, and technical professionals around the world for use in Science, Research, Development, Design, Engineering, Government and private labs, and more.
Buy a Lab Kit today and benefit from the advantages to save time and manage your budget:
• Minimize Trial & Error • Reduce Project Costs • Increase Confidence
|SAVE ON INTERNET ORDERS - LK-110-IS
Samples are now
added in all three
Evaluation Lab Kits.
Reduce trial & error
Use hand tools,
bench-top or model
LK-110-IS CONTENTSContains a variety of MuMETAL®, Co-NETIC®, and NETIC® alloy samples plus technical literature.
No Probe is included - See LK-120 that contains a probe.
Material Alloy Samples:
|MuMETAL® Fully Annealed Foil
1pc 0.002" x 15" x 4"
1pc 0.004" x 15" x 10"
1pc 0.006" x 15" x 8"
1pc 0.010" x 15" x 10”
Co-NETIC® AA Perfection Annealed Sheet *
1pc 0.025" x 15" x 10"
NETIC® S3-6 Foil & Sheet
1pc 0.004" x 15" x 10"
1pc 0.030" x 15" x 10"
NETIC® ET Foil (Tin Plated)
1pc 0.010" x 15" x 4"
|AA CABLE SHIELD®
1pc 1/2" ID x 12" long
Pressure Sensitive Tape (double-faced)
1pc 8ft roll
Model EF-401 Gaussmeter
Slide Rule Calculator
|* All Co-NETIC® AA material is Perfection Annealed and does not require re-annealing unless severe forming or heliarc welding is performed. For Stress Relieved material, required for stampings, severe forming or heliarc welding, request our MuMETAL® alloy.
FAQ: How Do I Use The Single Axis AC Magnetic Field Meter #EF-401(PDF - 76 KB)
Prototype with everyday common hand-tools, or bench- top and
model-shop equipment. Add layers of material from a Lab Kit until the unwanted
field reduces (attenuates) to the desired level. Your prototype then serves as a production
model. After prototyping, contact
Magnetic Shield Corporation for a fabrication or stock material quote.
Do you need additional material? We can shear or slit our stock sizes to meet your needs. Most of our alloys are sold by the foot so you can purchase in small quantity for
further evaluation and sampling.
Need a quote for shield
fabrication? Once your shield design has been proven, send a sketch or drawing to our
experienced technical team for review and production quotation. We can provide our stock alloys or finished /
fabricated parts, annealed for shielding performance and ready for use. We offer a full line of fabrication capabilities to customers worldwide.