| NETIC S3-6 SHEET Stress Annealed2-Part Numbers | |||||||
| Thickness | Width* | Standard Lengths-Inches (mm) | |||||
| Inches | mm | Inches | mm | 15" (381mm) | 30" (762mm) | 60" (1524mm) | 120" (3048mm) |
| 0.014 | 0,36 | 30 | 762 | NS014-30-15 | NS014-30-30 | NS014-30-60 | NS014-30-120 |
| 0.020 | 0,51 | 30 | 762 | NS020-30-15 | NS020-30-30 | NS020-30-60 | NS020-30-120 |
| 0.025 | 0,64 | 30 | 762 | NS025-30-15 | NS025-30-30 | NS025-30-60 | NS025-30-120 |
| 0.030 | 0,76 | 30 | 762 | NS030-30-15 | NS030-30-30 | NS030-30-60 | NS030-30-120 |
| 0.050 | 1,27 | 30 | 762 | NS050-30-15 | NS050-30-30 | NS050-30-60 | NS050-30-120 |
| 0.062 | 1,58 | 30 | 762 | NS062-30-15 | NS062-30-30 | NS062-30-60 | NS062-30-120 |
| 0.095 | 2,41 | 30 | 762 | NS095-30-15 | NS095-30-30 | NS095-30-60 | NS095-30-120 |
| 1 Fully hydrogen annealed. No further annealing necessary if drawing and heliarc welding are avoided (Not suitable for deep draw, spinning or hydroform fabrication).
2 Stress annealed for ease of fabrication. Must be final hydrogen annealed for maximum attenuation. |
Ordering CO-NETIC and NETIC Sheet
|
| NETIC S3-6 FOIL Perfection Annealed-Part Numbers | |||||||
| Thickness | Width | ||||||
| Inches | mm | Inches | mm | Foil Only | Foil with PST | ||
| .004 | 0,102 | 4 | 101,6 | NF004-4 | NFT004-4 | ||
| .004 | 0,102 | 15 | 381,0 | NF004-15 | NFT004-15 | ||
| Ordering - | Specify part number and quantity in linear feet Description: CO-NETIC AA Foil or NETIC S3-6 Foil Thickness, width of coil. |
| Annealing - | All foil has been Perfection Annealed for maximum. Attenuation and acceptable surface appearance. |
| Lengths - | Standard coils of 25, 50 and 100 linear feet Other coil lengths also available. Priced per linear foot. |
| Shipment - | Standard widths shipped immediately from stock. |
| PST Backing - | All sizes available with double-faced. Pressure Sensitive Tape and release coated liner. Temperature range 32ºF. to 140ºF. (0ºC to 60ºC). Specify with P.S.T. backing. Shipment within one week of receipt of order. Specification No. UU-T-91E, Type II Grade B. Other backings available (contact factory). |
| Slitting - | Foils can be slit to a minimum width of 1/4" (6,350mm), with or without backing. Foil width tolerance ±.010" (0.254 mm), with backing ±.015" (0,381mm). Shipment within one week of receipt of order. |
| Thickness - | Foil tolerance is ±10% of thickness. |
©1997-2008 Magnetic Shield Corp.